Details
Product description
&Nbsp; for
Model:. DHO-900C
Place the form: Cone hanging cylinder type / external wall-mounted type
Size (length / width / height MM): 205/175/600
Equipped with water pump: Red Devil SP3 (Red Devil SP3)
Operating power: 15W
Maximum inspiratory capacity: 700L / H
The maximum recommended tank (L): 900
General density tank (L): 550 ~ 900
High density tank (L): 250 ~ 550
And the source of DHO wall-mounted skimmer features:
1 new conical reactor wall hanging design, stable foam collected more smoothly.
2 MS wall-mounted skimmer with a bubble deflector, rich foam to reduce shock.
3 DHO-900C is equipped with a pump designed for brush skimmer developed ultra-efficient devil needle.
4 easy to adjust level control: adjustment bar can be directly linked to the reaction chamber to adjust the water level through the back (unlike other traditional rectangular wall-mounted skimmer is required in order to be adjusted through passive cumbersome collecting cup lifting)
5 Detachable collection cup design, extremely easy to clean. Comes with a plug and the sewage outfall, ongoing maintenance work easier.
&Nbsp; for 
MS external wall-mounted skimmer for the first time start-up method introduced
For the first time installation and the source of wall-mounted external skimmer, we need to empty the pump body in order to start the air skimmer.
Please wall-separator start the following two steps:
Step 1: Water filled the tank to the reaction chamber of the skimmer , Water needs to cover the skimmer reaction chamber of the pump inlet, the water level of the reaction chamber at least 3CM more appropriate.
Step 2: Discharge skimmer (pump) gas inside, start the skimmer ��
Newly installed wall-mounted external protein skimmer. Internal gas pump will exist, these gases can affect skimmer pump for the first time and start pumping. Exclude internal gas easiest way is: Stick a finger double muffler inlet pipe at the same time, start the pump �� When the pump extracted water flow into the reaction chamber, and fill the reaction chamber, the water flows out from the outlet pipe appreciate the skimmer. This time, we can loosen our fingers to complete wall-mounted skimmer startup process.
hint:
1 or more rows of air start procedure only applies to Wall-Mounted external protein skimmer Other MS series of all non-built-in wall-mounted and external skimmer can directly open the pump to start skimmer.
2 After the first successful launch, external wall-mounted skimmer is closed again and start do not need to repeat the above steps, you can directly open the pump to start skimmer.
2 as an external wall-mounted skimmer pump was removed for cleaning, re-install restart, follow the steps above to re-start the exhaust air.
Other issues:
Q: What is a wall-mounted external skimmer and wall-mounted built-skimmer
A: The difference is that a different place in the form of the reaction chamber.
Wall-Mounted external skimmer means wall-mounted skimmer is hanging in the main reaction chamber outside the cylinder / filtration tank outside the skimmer. That is the reaction chamber is not directly immersed in the body of water. We need to exhaust internal air pump to start.
Built-In wall-mounted skimmer means that the reaction chamber body wall-mounted skimmer is in the cylinder / filtration tank. That is the main reaction chamber and pump are directly immersed in the body of water. Do not need to discharge the internal air pump, the pump can be started directly open.
DHO products
DHO-900C
FIG product runs true
&Nbsp; for
Additional Information
| Voltage | 220v |
|---|---|
| Brand | Marine color |
| Capability | 0 L |
| Power | 0 W |
| Flow Rate | 0 Liters/Hour |
| Lift | 0 meters |
| Length | $0 |
